CareerExamPro

ARRT Radiography Certification Exam (RT(R)) practice test

11 practice questions for this exam, each with a full explanation and cited rule or blueprint reference.

Start practising

ARRT, CST, SPI, RRT & ASCP MLS: practice drill

10 realistic exam questions, graded as you go, with the exact rule or statute citation for every answer. Start free, no sign-up.

Timed mock exam

11 questions in 13 minutes, drawn from every topic. No answers shown until the end, then a full score breakdown, your weakest topics and a review of what you missed.

Practice tests that prepare you for this exam

Practise by topic

About this exam

Agency / Issuer
ARRT
Region
United States

Exact question counts, passing scores, and allowed reference materials vary by testing window and state/agency. Always confirm current rules with the official testing provider.

Sample questions

During a mobile C-arm fluoroscopy procedure, an air kerma rate of 3.6 mGy/min is measured at a distance of 2 feet from the radiation source. If a technologist steps back to 6 feet from the source with all other exposure factors unchanged, what is the new air kerma rate?

  1. 1.20 mGy/min, because tripling the distance reduces beam intensity proportionally by a factor of three.
  2. 0.40 mGy/min, because tripling the distance reduces beam intensity to one-ninth of its original value.
  3. 0.90 mGy/min, because moving farther from the C-arm reduces scatter intensity by a standard factor of four.
  4. 1.80 mGy/min, because stepping back to 6 feet halves the radiation intensity across the diverging beam.
Show the answer

B. 0.40 mGy/min, because tripling the distance reduces beam intensity to one-ninth of its original value.

By the Inverse Square Law, I1 / I2 = (D2 / D1)^2, so I2 = I1 × (D1 / D2)^2. Substituting I1 = 3.6 mGy/min, D1 = 2 ft, and D2 = 6 ft yields I2 = 3.6 × (2 / 6)^2 = 3.6 × (1 / 9) = 0.40 mGy/min. Under ARRT radiation physics and OR fluoroscopy safety principles, tripling distance cuts exposure intensity to one-ninth.

Reference: ARRT Radiography Physics — Inverse Square Law (Bushong Ch. 4)

A patient with chronic hypercapnic COPD (baseline PaCO2 56 mmHg) presents in acute exacerbation with tachypnea (RR 28/min) and SpO2 84%. Why is a 28% air-entrainment (Venturi) mask preferred over a non-rebreathing mask (NRM) or standard nasal cannula for controlled oxygen therapy?

  1. It is a low-flow reservoir system that delivers 90%–100% FiO2 while actively venting exhaled carbon dioxide.
  2. It applies continuous positive end-expiratory pressure of 5–10 cmH2O to maintain SpO2 above 99%.
  3. It is a high-flow, fixed-performance device delivering a precise FiO2 independent of breathing pattern.
  4. It traps exhaled carbon dioxide inside a sealed reservoir bag to stimulate central medullary chemoreceptors.
Show the answer

C. It is a high-flow, fixed-performance device delivering a precise FiO2 independent of breathing pattern.

An air-entrainment (Venturi) mask is a high-flow, fixed-performance oxygen delivery device whose total gas output exceeds the patient's peak inspiratory flow, delivering a precise, stable FiO2 (e.g., 24%–50%) regardless of rapid or irregular breathing. In chronic hypercapnic COPD (target SpO2 88%–92%), controlled FiO2 prevents worsening hypercapnia caused by excess oxygen reversing hypoxic pulmonary vasoconstriction, the Haldane effect, and hypoxic drive blunting.

Reference: NBRC TMC/RRT & ARRT Patient Care — Oxygen Delivery Devices (AARC CPG)

An AP lumbar spine radiograph acquired at 80 kVp and 40 mAs demonstrates adequate image receptor exposure, but the radiographer wants to increase beam penetration and reduce patient skin dose while maintaining equivalent receptor exposure. Applying the 15% kVp rule, which new technical factors should be selected?

  1. 92 kVp and 20 mAs
  2. 92 kVp and 80 mAs to compensate for lower scatter absorption
  3. 68 kVp and 20 mAs to keep receptor exposure unchanged
  4. 95 kVp and 20 mAs by adding 15 kVp and halving mAs
Show the answer

A. 92 kVp and 20 mAs

Under the ARRT 15% kVp rule, increasing kVp by 15% approximately doubles exposure to the image receptor; to maintain constant receptor exposure, mAs must be halved. Here, 80 kVp × 1.15 = 92 kVp (an increase of 12 kVp, not a flat 15 kVp), and 40 mAs / 2 = 20 mAs. Raising kVp while halving mAs also lowers patient entrance skin exposure.

Reference: ARRT Image Production — 15% kVp Rule (Carlton & Adler Ch. 16)

Taking this exam soon?

Tell us which exam domains or calculation drills you want more practice on.

Other Hospital Allied-Health Boards exams